AMAZEMET
Device Configurator

Choose a device and a starting version. You refine every module in the next step, with live availability and a quote at the end.

rePOWDER Laser
| rePOWDER | LaserNEW
Laser Ultrasonic Atomizer
rePOWDER
| rePOWDER |
Ultrasonic atomization platform
inFURNER
| inFURNER |
High-vacuum furnace
arcMELTER
| arcMELTER |
Arc-melting furnace
Start from a preconfiguration

Load a ready build, then refine every module.

rePOWDER Laser
rePOWDER LaserNEW

The laser works with the included 40 kHz sonotrode and takes its feedstock as wire. The wire feeder is included in the device. The add-ons are the welding camera and the oxygen sensor for recirculation.

Load preset
rePOWDER Standard
rePOWDER Standard

The arc-melting base: plasma module and generator, 40 kHz sonotrode, TIG torch and a water-air chiller. The starting point for most metals.

Load preset
rePOWDER Hybrid
rePOWDER Hybrid

Standard plus the induction module, for low-melting, volatile and precious metals processed in a graphite crucible.

Load preset
rePOWDER Powder2Powder
rePOWDER Powder2Powder

Recycling setup: the focused plasma and P2P torch with the powder feeder, to re-atomize existing powder into finer, spherical powder.

Load preset
Atomization Services

We turn your alloy into spherical metal powder by ultrasonic atomization, in small batches and from almost any feedstock. In five years we have atomized more than 200 alloys. The 35 grades below come from the Book of Powders, each with SEM images, process parameters and chemical composition, so you can see what you get before you order. Your alloy isn't listed? Start with custom powders.

Custom powders

We produce powders from virtually any feedstock material, tailored to your requirements.

SAC-305

Book of Powders No. 1. Induction melting, 320 °C, 60 kHz ultrasonics. Feedstock: cast ingots.

Bi

Book of Powders No. 2. Induction melting, 350 °C, 40 kHz ultrasonics. Feedstock: lumps.

AZ91 Mg-9Al-1Zn

Book of Powders No. 3. Induction melting, 800 °C, 40 kHz ultrasonics. Feedstock: cast ingots.

Mg-7.5Li

Book of Powders No. 4. Induction melting, 800 °C, 40 kHz ultrasonics. Feedstock: cast ingots.

AW-6082 AlSi1MgMn

Book of Powders No. 5. Induction melting, 800 °C, 40 kHz ultrasonics. Feedstock: cast ingots.

Sb

Book of Powders No. 6. Induction melting, 800 °C, 40 kHz ultrasonics. Feedstock: granules.

Al + 20 vol.% SiC

Book of Powders No. 7. Induction melting, 850 °C, 20 kHz ultrasonics. Feedstock: consolidated powders.

Al-4Cu-0.6Sc

Book of Powders No. 8. Induction melting, 850 °C, 40 kHz ultrasonics. Feedstock: cast ingots.

Al-2Sr

Book of Powders No. 9. Induction melting, 1200 °C, 40 kHz ultrasonics. Feedstock: cast ingots.

Yb

Book of Powders No. 10. Plasma melting, arc current 80 A, 20 kHz ultrasonics. Feedstock: irregular pieces.

Au-12.5Ag-12.5Cu (18 ct yellow gold)

Book of Powders No. 11. Induction melting, 1200 °C, 40 kHz ultrasonics. Feedstock: cast ingots.

Ge

Book of Powders No. 12. Plasma melting, arc current 150 A, 40 kHz ultrasonics. Feedstock: lumps.

Ag

Book of Powders No. 13. Induction melting, 1100 °C, 40 kHz ultrasonics. Feedstock: granules.

GRCop-42 (Cu-4Cr-2Nb at.%)

Book of Powders No. 14. Induction melting, 1300 °C, 60 kHz ultrasonics. Feedstock: rods.

Cu + 5 vol.% SiC

Book of Powders No. 15. Induction melting, 1300 °C, 20 kHz ultrasonics. Feedstock: rods.

Inconel 718

Book of Powders No. 16. Plasma melting, arc current 220 A, 40 kHz ultrasonics. Feedstock: recycled LPBF powder.

NiTi

Book of Powders No. 17. Plasma melting, arc current 220 A, 40 kHz ultrasonics. Feedstock: gas atomization oversprays.

Gd

Book of Powders No. 18. Plasma melting, arc current 170 A, 20 kHz ultrasonics. Feedstock: lumps.

Si

Book of Powders No. 19. Induction melting, 1600 °C, 40 kHz ultrasonics. Feedstock: lumps.

Fe-40Cr-20Ni (at.%) MEA

Book of Powders No. 20. Plasma melting, arc current 170 A, 20 kHz ultrasonics. Feedstock: processing scraps.

MS-1 maraging steel 18Ni300

Book of Powders No. 21. Plasma melting, arc current 250 A, 40 kHz ultrasonics. Feedstock: recycled LPBF powder.

X65Q steel DIN EN ISO 3183

Book of Powders No. 22. Plasma melting, arc current 220 A, 40 kHz ultrasonics. Feedstock: pipe sections.

Ti-6Al-4V – Ti Grade 23 ELI

Book of Powders No. 23. Plasma melting, arc current 240 A, 40 kHz ultrasonics. Feedstock: gas atomization oversprays.

Ti-10Mo

Book of Powders No. 24. Plasma melting, arc current 250 A, 40 kHz ultrasonics. Feedstock: elemental powders.

Ti-13Nb-13Zr

Book of Powders No. 25. Plasma melting, arc current 210 A, 40 kHz ultrasonics. Feedstock: rods.

Ti-6Ta-1.5Zr-0.2Ru-5Cu

Book of Powders No. 26. Plasma melting, arc current 210 A, 40 kHz ultrasonics. Feedstock: arc-melted billets.

Ti-35Nb-7Zr-5Ta

Book of Powders No. 27. Plasma melting, arc current 300 A, 40 kHz ultrasonics. Feedstock: elemental powders.

Pt-10Rh

Book of Powders No. 28. Plasma melting, arc current 260 A, 40 kHz ultrasonics. Feedstock: rods.

Zr

Book of Powders No. 29. Plasma melting, arc current 250 A. Feedstock: rods.

Ti-47Nb

Book of Powders No. 30. Plasma melting, arc current 250 A, 40 kHz ultrasonics. Feedstock: rods.

TiNbZrHf – HEA (equiatomic)

Book of Powders No. 31. Plasma melting, arc current 240 A, 40 kHz ultrasonics. Feedstock: rods.

(TiTaNbZr)+Y

Book of Powders No. 32. Plasma melting, arc current 340 A, 40 kHz ultrasonics. Feedstock: arc-melted billets.

C103 (Nb-10Hf-1Ti)

Book of Powders No. 33. Laser melting, 40 kHz ultrasonics. Feedstock: plates.

Nb-13W-4Re-3Ru

Book of Powders No. 34. Laser melting, 40 kHz ultrasonics. Feedstock: rods.

Re

Book of Powders No. 35. Plasma melting, arc current 300 A, 40 kHz ultrasonics. Feedstock: arc-melted powder.